current position:Home>Mazda wants to develop hydrogen fueled rotor engine with direct combustion of hydrogen

Mazda wants to develop hydrogen fueled rotor engine with direct combustion of hydrogen

2021-08-26 14:36:30 Netease automotive industry

( The original title : Mazda wants to develop hydrogen fuel rotor engine It can burn hydrogen directly )

According to foreign media reports , Mazda The company is developing a Wankel that burns hydrogen fuel (Wankel) The engine , Used to RX-8 Its successor models provide power .

( picture source : Mazda )

at present , The engine is still in its infancy , But this solution has several technical advantages . One of the weaknesses of hydrogen is , It is possible to catch fire at a hot spot in the cylinder . According to introducing , There are no hot spots in the Wankel engine , Because it uses a rotor , Not the piston , So it's very suitable for burning hydrogen .

For this technology , Burning hydrogen is not common , Most car manufacturers use this fuel to generate electricity , One or more motors are then driven electrically . Of course , This is not unprecedented . Mazda is in 2000 Age testing and even renting experimental RX-8, Its engine can use gasoline or hydrogen . however , The system occupies the whole trunk , Heavy near 200 pounds . This engine is even used in some test Mazda5 Mini vans . lately , Toyota Made a Corolla Parameters picture ) Endurance Sports-Car , Powered by a hydrogen burning turbocharged three cylinder engine .

at present , There is no information on which model the new rotor engine will be used . One possibility is RX-Vision Concept coupe , This model was launched this year 8 May appear in the trademark application , It may be listed as a hybrid vehicle with a pair of in wheel motors . If it looks close 2015 Concept car , without doubt , Fans will welcome it as RX-8 Successor .

An anonymous person in charge of Mazda said :“ If we decide to do this , Its prototype may be completed within three years . The most likely is a system combined with an electric turbine .” Prototyping is relatively easy ; Develop a compelling business case , It's much more difficult . Final , Whether the project is licensed for production , It depends on the development cost , And the number of people buying vehicles .

copyright notice
author[Netease automotive industry],Please bring the original link to reprint, thank you.
https://caren.inotgo.com/2021/08/20210826143627903u.html

Random recommended